Solar Loan Software: Installer Payouts and Subsidy Tracking
Last reviewed: November 2026
Solar loan software is the lending system that finances rooftop solar systems from application to closure, linking installer payouts to installation milestones and tracking the government subsidy until it reaches the loan account. Generic loan systems handle the equated monthly instalment (EMI) but not the vendor, the distribution company (DISCOM) inspection or the subsidy credit that changes the loan mid-tenure.
This guide is for heads of product and chief business officers at banks, non-banking financial companies (NBFCs) and fintech lenders deciding how to run a rooftop book. It covers PM Surya Ghar: Muft Bijli Yojana rules, a subsidy calculator, an installer payout schedule, a data model and a capability checklist, plus how the Digiqt Lending Platform can carry them.
At a Glance
- The subsidy lands in the loan account, so the system must expect it, match it and recalculate the loan.
- Installers get paid on evidence, not invoices, with each payout tied to a scheme milestone.
- Domestic content requirement (DCR) modules are a hard gate. Non-DCR modules make the installation ineligible for subsidy.
- The application ID matters as much as the loan ID, because the National Portal is the subsidy's system of record.
Generic Loan System or Solar Loan Software: Which Does a Rooftop Book Need?
A rooftop book needs solar loan software once subsidy credits and installer payouts run at volume, because a generic loan system has no home for either. This comparison shows where the two differ.
| Requirement | Generic Loan System | Solar Loan Software |
|---|---|---|
| Record key | Loan ID only | National Portal application ID linked to the loan |
| Who gets paid | One payout on invoice | Registered vendor, in evidence-gated milestones |
| Module eligibility | Not checked | DCR proof blocks the installation payout |
| Utility steps | Not tracked | DISCOM inspection and e-token status events |
| Subsidy | Found on a bank statement scan | Expectation record matched to the credit |
| Loan change | Manual reschedule | EMI or tenure recalculated on credit |
What Does a Generic System Cost on 1,000 Rooftop Loans?
A generic system costs analyst hours and borrower goodwill, mostly at the subsidy credit. In this illustrative month, a lender books 1,000 rooftop loans of 3 kW.
| Measure | Value |
|---|---|
| Central financial assistance (CFA) expected (1,000 × ₹78,000) | ₹7.8 crore |
| Credits arriving without a matchable reference (5%) | 50 credits, ₹39 lakh in suspense |
| Manual matching at 10 minutes per credit, all loans | About 167 hours |
| Borrowers paying the full EMI on unadjusted principal | 50 until matched |
Each of those 50 borrowers is a likely complaint, and each credit needs an analyst to trace it.
What Is Solar Loan Software?
Solar loan software is a segment platform that sits between the borrower, the registered vendor, the DISCOM and the National Portal for rooftop solar. It shares DNA with equipment finance software, but adds a subsidy event and a utility inspection that equipment loans do not have.
Like education loan software, where money goes to an institution, solar financing pays a third party rather than the borrower. That third party, the installer, also controls most of the evidence the lender needs.
Which Capabilities Should Decide Your Solar Loan Software Choice?
Ten capabilities should decide your solar loan software choice, whether you buy or build. Score vendors against this checklist, or turn each line into a build story.
- Store the National Portal application ID against every loan.
- Verify vendor registration before onboarding.
- Compute expected CFA from commissioned capacity and state category.
- Block the installation payout without DCR module proof.
- Release payouts only on milestone evidence.
- Track DISCOM inspection and e-token status.
- Raise an alert when CFA is unpaid 15 days after DISCOM approval.
- Match each CFA credit to its loan and refund any excess.
- Recalculate EMI or tenure on credit, with borrower consent.
- Report subsidy ageing and vendor performance monthly.
What Do the PM Surya Ghar Rules Mean for Lenders?
The PM Surya Ghar rules mean lenders must respect scheme gates before money moves. According to the Ministry of New and Renewable Energy (MNRE) Guidelines for PM-Surya Ghar: Muft Bijli Yojana, Central Financial Assistance to Residential Consumers, these points matter most.
| Scheme Rule | What It Means for Your Software |
|---|---|
| CFA of ₹30,000 per kilowatt peak (kWp) for the first 2 kWp, ₹18,000/kWp for the next 1 kWp, nothing beyond 3 kWp | Subsidy calculator caps at ₹78,000 |
| Special category states: ₹33,000 and ₹19,800/kWp | State-aware rates |
| Modules must meet the DCR: Indian modules made from Indian cells | Block installation payout without DCR proof |
| Only vendors registered on the National Portal | Vendor master checks registration |
| DISCOM physical inspection, then e-token activation | Two separate status events |
| CFA goes to the loan account if a loan was opted; excess to the bank account | Subsidy matching and refund logic |
| CFA processed within 15 days of DISCOM approval | Ageing alert after 15 days |
| Implementation period till 31 March 2027 | Product end-date planning |
The guidelines also envisage standardised loan products near the repo rate plus 50 basis points for systems up to 3 kW, offered through the Jan Samarth portal integration or directly.
What Does the Solar Loan Workflow Look Like?
The solar loan workflow runs in nine steps, five owned by the scheme and four by the lender. Map each step to a status in your system.
- Consumer registers on the PM Surya Ghar National Portal and gets an application ID.
- Consumer chooses a vendor registered on the portal.
- Feasibility is cleared; systems up to 10 kW are deemed accepted under the Electricity (Rights of Consumers) Rules, 2020 where states have operationalised it.
- Lender sanctions the loan and records the application ID and loan account.
- Vendor installs the system; consumer uploads details and geo-tagged photographs.
- DISCOM inspects, signs the net meter agreement and approves.
- The e-token is activated with the eligible CFA and redeemed by the consumer.
- CFA is credited to the loan account, with any excess to the bank account.
- Lender recalculates the loan and closes the vendor's final milestone.
How Do You Calculate the Rooftop Solar Subsidy?
You calculate the rooftop solar subsidy by applying the scheme's slab rates to the installed capacity, capped at 3 kWp.
CFA = ₹30,000 × min(capacity, 2) + ₹18,000 × min(max(capacity − 2, 0), 1)
| Installed Capacity | CFA |
|---|---|
| 1.5 kWp | ₹45,000 |
| 2.5 kWp | ₹69,000 |
| 3 kWp | ₹78,000 |
| 6 kWp | ₹78,000 |
These match the worked examples in the MNRE guidelines. The CFA is based on actual installed capacity, so store the commissioned figure, not the quoted one.
Is your team matching subsidy credits to loans by hand?
Build a Solar Loan Journey on the Digiqt Lending Platform
Scope milestone payouts and subsidy tracking for your rooftop book, or talk to us about your solar lending plans.
How Should Lenders Pay Solar Installers?
Lenders should pay solar installers in three or four milestones, each released only when the matching evidence is in the file. This schedule is illustrative; agree yours in the vendor agreement.
| Milestone | Evidence Required | Payout Share |
|---|---|---|
| Installation complete | DCR module serials, invoice, geo-tagged photographs | 60% |
| DISCOM inspection passed | Inspection approval on the National Portal | 25% |
| Net meter installed and commissioned | Net metering agreement or commissioning record | 10% |
| Retention | Released after the first service visit | 5% |
Check invoices with proforma invoice verification, capture site photos through collateral geo-tagging, and settle vendors through partner payout reconciliation. Vendors also owe the customer five years of free maintenance under the scheme's comprehensive maintenance contract.
What Data Model Does Solar Loan Software Need?
Solar loan software needs six linked records beyond the standard loan account. Lift this data model into your requirements document.
| Record | Key Fields |
|---|---|
| Scheme application | National Portal application ID, DISCOM, consumer account number, state category |
| Vendor | National Portal registration, bank account, agreement, payout terms, performance flags |
| System | Quoted and commissioned capacity (kWp), DCR module serials, inverter details |
| Milestone | Milestone type, evidence files, approval date, payout amount, status |
| Subsidy expectation | Expected CFA, e-token status, DISCOM approval date, received amount, match status |
| Loan | Sanction, disbursements, subsidy credit, recalculation choice, revised schedule |
Capital Subsidy vs Interest Subvention: Why Does It Matter?
A capital subsidy is a one-time credit that reduces principal, while an interest subvention pays part of the interest over time. PM Surya Ghar's CFA is a capital subsidy, so it needs a credit-matching flow rather than the claim cycle described in subvention scheme management.
How Does the Digiqt Lending Platform Help Solar Lenders?
The Digiqt Lending Platform helps solar lenders by delivering a custom lending product in weeks, with application programming interfaces (APIs) for onboarding, disbursement and repayments. Digiqt can build the solar-specific steps into it.
Without that build, installers live in a spreadsheet and the loan pays out once, against an invoice. In a platform built by Digiqt, a vendor master holds each installer's registration and payout terms, and milestone payouts are gated by evidence.
Subsidy credits are otherwise spotted by scanning bank statements, and the loan is rescheduled by hand afterwards. Digiqt can instead build a subsidy expectation record matched to the credit, with the EMI or tenure recalculated as soon as the credit lands.
Onboard installers the way you handle merchant onboarding for consumer durable loans, and run solar alongside other products on a multi-product lending platform.
How Does a ₹78,000 Subsidy Credit Reshape a 3 kW Solar Loan?
A ₹78,000 subsidy credit reshapes a 3 kW solar loan by cutting principal in one go, after which you either lower the EMI or shorten the tenure. Work through this illustrative ₹1.95 lakh system with 10% margin.
First, the CFA: ₹30,000 × 2 + ₹18,000 × 1 = ₹78,000 for 3 kWp. Then the loan:
| Item | Value |
|---|---|
| Loan at 7% for 120 months | ₹1,75,500, EMI ₹2,038 |
| Outstanding after three EMIs | ₹1,72,440 |
| CFA credited in month 3 | ₹78,000 |
| New outstanding | ₹94,440 |
| Option A: same tenure (117 months) | EMI falls to ₹1,116 |
| Option B: same EMI | Closes in about 55 more months |
Apply the credit through your repayment appropriation order rules so dues are cleared before principal.
Want every subsidy credit matched to the right loan on day one?
Scope Solar Loan Software With Digiqt
Map your vendor, milestone and subsidy flows into one platform, visit Digiqt, or book a solar finance working session.



