Payment Gateway Cost for Lenders: Cut Fees, Keep Repayments
Last reviewed: November 2026
Payment gateway cost for lenders is the total a lender pays to accept loan repayments through payment gateways, payment aggregators (PAs) and banks, including the merchant discount rate (MDR), other fees and Goods and Services Tax (GST). Most lenders track it as one line in operating expenses, so nobody notices when a shift in channel mix or a new pricing rule quietly adds lakhs a month.
This guide is for chief financial officers (CFOs) and chief technology officers (CTOs) at non-banking financial companies (NBFCs), banks, housing finance companies (HFCs) and fintech lenders. It covers what drives collection charges, the 2026 Unified Payments Interface (UPI) MDR rules, a six-step plan to cut costs and the metrics that keep repayment rates safe.
Key Takeaways
- From 15 October 2026, manual UPI payments above ₹2,000 carry a 0.4% MDR capped at ₹300, while UPI AutoPay carries no prescribed MDR.
- Lenders cannot pass UPI MDR on to borrowers, so cost must be managed through channel mix, not surcharges.
- The real measure is cost per successful payment, because a cheap channel that fails often is not cheap.
- Most savings come from moving scheduled equated monthly instalments (EMIs) onto mandates and keeping cards for exceptions.
What Is Payment Gateway Cost for Lenders?
Payment gateway cost for lenders covers every charge on money coming in, from the percentage fee on each payment to the fixed, failure and refund fees in the contract. It is driven by three things: how borrowers pay, how much they pay at a time and what the lender has negotiated.
Most gateways that collect and settle funds for lenders are payment aggregators. According to the RBI (Regulation of Payment Aggregators) Directions, 2025, issued on 15 September 2025, they are authorised and supervised entities, so check your partner's authorisation before comparing prices.
Payment links are one of the most used gateway products in collections, and our guide to digital payment links for loan collections covers how to use them well. This guide is about what all those payments cost.
What Does Each Repayment Channel Cost?
Each repayment channel has a different cost floor, and the 2026 rules changed the UPI line. The Department of Financial Services and National Payments Corporation of India (NPCI) FAQs of 15 September 2026 set out the UPI rates and compare them with cards.
| Channel | Cost Basis | Source |
|---|---|---|
| UPI up to ₹2,000 | Charge-free | Notification S.O. 5067(E), 14 September 2026 |
| UPI above ₹2,000 | 0.4% MDR, capped at ₹300 from ₹75,000 | DFS and NPCI FAQs, from 15 October 2026 |
| UPI AutoPay | No prescribed MDR | DFS and NPCI FAQs |
| RuPay debit card | Charge-free | Notification S.O. 5067(E) |
| Other debit cards | MDR capped at up to 0.90% | DFS and NPCI FAQs |
| Credit cards | Typically 1.5% to 2.5% | DFS and NPCI FAQs |
| NACH and net banking | Per-transaction fees set by contract | Your sponsor bank or gateway agreement |
Why Does Payment Gateway Cost for Lenders Rise Unnoticed?
Payment gateway cost for lenders rises for five reasons: scheduled EMIs paid manually, card use creeping up, hidden fees in the contract, GST left out of budgets and new pricing rules not modelled. Each one can be checked monthly.
| Cause | Effect | Prevention Check |
|---|---|---|
| Scheduled EMIs paid by manual UPI or cards | Fee on every EMI that a mandate could take free or cheaply | Mandate share of scheduled EMIs |
| Credit cards offered by default | Highest MDR on the largest payments | Card share by ticket size |
| Failure, refund and settlement fees ignored | Invoice higher than rate card | Monthly invoice audit |
| GST on fees left out | Budget understated by the GST amount | Cost reported including GST |
| 2026 UPI MDR not modelled | Unplanned cost from October 2026 | EMI size distribution by channel |
Why Should Lenders Think Twice About Credit Card Repayments?
Lenders should think twice because credit cards are the most expensive channel and can hide stress. A borrower paying one loan's EMI with a credit card may be moving the debt, not paying it.
Keep cards for genuine one-off needs and track how often the same borrower uses them. Repeated card repayments are a signal for the collections team as well as for finance.
What Is the Right Way to Cut Payment Gateway Cost for Lenders?
The right way to cut payment gateway cost for lenders has six steps: map, cost, model, shift, route and audit. The order matters, because the biggest saving usually comes from the channel shift, not from negotiating rates.
- Map collections by channel, product and ticket size.
- Cost each channel on an all-in basis, including GST, failures and refunds.
- Model the 2026 UPI MDR on your own EMI size distribution.
- Shift scheduled EMIs onto mandates wherever possible.
- Route ad hoc payments to the cheapest channel that still succeeds.
- Audit gateway invoices against contracts every month.
Steps 1 and 2: How Do You Calculate the True Cost of a Channel?
Calculate the true cost of a channel as all fees plus the follow-up cost of failed payments, divided by successful payments. Fees should include the MDR, fixed charges, failure and refund fees and GST.
A channel with a low fee but a 20% failure rate can cost more than a pricier one, once collector time and repeated reminders are counted. Our guide to collection efficiency explains how to link payment success to collection outcomes.
Step 3: How Will the 2026 UPI MDR Affect Your Book?
The 2026 UPI MDR will affect lenders whose borrowers pay EMIs above ₹2,000 by manual UPI. According to the FAQs, a ₹3,000 payment costs the merchant ₹12, a ₹50,000 payment ₹200, and payments of ₹75,000 and above are capped at ₹300.
The FAQs also say UPI MDR cannot be passed on to customers. So pull a year of UPI repayments, group them by amount band and apply the new rates, because most retail EMIs sit well above ₹2,000.
Steps 4 and 5: Which Payments Should Move to Mandates?
Every scheduled EMI should move to a mandate unless the borrower cannot register one. UPI AutoPay carries no prescribed MDR under the 2026 FAQs, and NACH fees are usually a small fixed amount per debit set by contract.
How to choose between the two mandate rails is covered in our guide to eNACH vs UPI AutoPay. For ad hoc payments, route borrowers to UPI or RuPay debit before other cards, and show credit cards last.
Splitting an EMI into several payments of ₹2,000 or less to avoid the fee is not a good plan. It adds friction for the borrower and creates matching work for operations.
Step 6: What Should a Gateway Invoice Audit Check?
A gateway invoice audit should check that each fee line matches the contract, that no fee is charged on failed or refunded payments unless agreed, and that GST is applied only once. Settlement reports should show the gross amount, MDR and GST for every payment so the audit can be automated.
The same per-payment detail also stops fee deductions from turning into suspense items, as our guide to unidentified receipts in lending explains.
Which Contract Terms Drive Payment Gateway Cost?
Seven contract terms drive most payment gateway cost: rate by method, fixed fees, failure fees, refund fees, chargeback fees, settlement speed charges and minimum volume commitments.
| Contract Term | Why It Matters |
|---|---|
| Rate by payment method | Sets the per-payment fee on each channel |
| Fixed setup or annual fees | Raises cost for low-volume products |
| Failed transaction fees | Charges for payments that never arrive |
| Refund fees | Adds cost to every duplicate or excess payment |
| Chargeback fees | Penalises disputed payments |
| Faster settlement charges | Trades fees for cash availability |
| Minimum volume commitments | Locks you in when your mix changes |
Do you know what each successful EMI collection costs you, by channel, including GST?
Talk to Our Software Development Specialists
Visit Digiqt to see how custom software can track and cut collection charges by channel.
How Much Can Channel Mix Cut Payment Gateway Cost for Lenders?
Channel mix can cut a large share of collection charges, often more than rate negotiation. In this illustrative scenario, a lender collects 1,00,000 EMIs a month with an average EMI of ₹10,000.
Assume NACH costs ₹5 a debit, credit cards 2% and other debit cards 0.9%, and that half of manual UPI EMIs move to AutoPay and half of card payments move to UPI. These are assumptions, not quotes.
| Channel a Month | Current Mix | Optimised Mix |
|---|---|---|
| NACH mandates | 60,000 payments, ₹3.0 lakh | 60,000 payments, ₹3.0 lakh |
| UPI AutoPay | 0 payments, ₹0 | 12,500 payments, ₹0 |
| Manual UPI at 0.4% | 25,000 payments, ₹10.0 lakh | 20,000 payments, ₹8.0 lakh |
| Debit cards at 0.9% | 10,000 payments, ₹9.0 lakh | 5,000 payments, ₹4.5 lakh |
| Credit cards at 2% | 5,000 payments, ₹10.0 lakh | 2,500 payments, ₹5.0 lakh |
| Total before GST | ₹32.0 lakh | ₹20.5 lakh |
The lesson for leadership: collection cost is mostly a product design decision. The lender that registers a mandate at onboarding has already won the negotiation.
Feed these costs into pricing as well. Our guide to loan product profitability analysis shows where collection charges belong in product margins.
Where Does Custom Software Development Fit in Payment Gateway Cost for Lenders?
Digiqt's custom software development service covers user interface and user experience (UI/UX) design with wireframing and prototyping, web development, scalable and secure app development and quality assurance. Its technology categories include backend, frontend, database, DevOps and data engineering, delivered by a dedicated development team that starts with problem statement analysis.
For collection costs, that maps to three builds:
- Cost-aware payment pages that show mandates and UPI first and cards last.
- A routing layer that sends ad hoc payments to the channel with the best cost and success rate.
- Fee analytics that read settlement reports and audit every fee line against contract.
Test any routing change on a small share of traffic first and compare success rates before a full rollout. Our guide to a lending tech stack audit shows where payment components fit in the wider stack.
Digiqt's least-cost routing AI agent shows how payment routing can weigh cost against success.
Which Payment Channel Fits Each Repayment?
The right channel depends on whether the payment is scheduled, its size and the borrower's situation.
| Repayment Situation | Recommended Approach |
|---|---|
| Scheduled EMI, any size | NACH or UPI AutoPay mandate |
| Ad hoc payment up to ₹2,000 | UPI, which stays charge-free |
| Ad hoc payment above ₹2,000 | UPI or RuPay debit before other cards |
| Large foreclosure payment | Bank transfer, or UPI within limits, where the ₹300 cap applies |
| Borrower insists on a credit card | Allow, disclose any permitted fee, and flag repeat use |
Which Metrics Show Payment Gateway Cost Is Under Control?
Five metrics show whether payment gateway cost for lenders is under control: blended cost per ₹100 collected, cost per successful payment, mandate share, success rate by channel and fee variance. Review them monthly with finance and collections together.
| Metric | Formula | What a Weak Number Signals |
|---|---|---|
| Blended cost per ₹100 collected | All payment fees incl. GST ÷ amount collected × 100 | Costly channel mix |
| Cost per successful payment | All fees plus failure follow-up ÷ successful payments | Cheap channels that fail often |
| Mandate share of scheduled EMIs | EMIs collected by mandate ÷ scheduled EMIs | Weak mandate registration |
| Success rate by channel | Successful payments ÷ attempts | Routing to channels that fail |
| Fee variance | (Invoiced fees − contract fees) ÷ contract fees | Billing errors or hidden fees |
Which Mistakes Raise Payment Gateway Cost?
Four mistakes raise payment gateway cost, and each is avoidable.
- Negotiating rates before fixing mix. The biggest savings come from mandates.
- Showing credit cards first on payment pages. Borrowers pick the first option.
- Adding a surcharge for UPI MDR. The 2026 FAQs say merchants cannot pass it on.
- Ignoring GST and failure fees. The real cost is higher than the rate card.
What Is Changing Next?
The fine print of UPI pricing is still being settled. According to the 2026 FAQs, the UPI and Services Steering Committee headed by NPCI decides operational parameters and category caps, and the flat ₹5 categories named so far do not include loan repayment.
A Vinod Kothari Consultants analysis of September 2026 reads the flat rate as available only for overdue collections through debt collection agencies, not regular EMIs. Confirm the merchant category your acquiring bank has assigned you, and recheck it whenever NPCI updates category caps.
Want collection charges cut without losing a single repayment?
Talk to Our Software Development Specialists
Visit Digiqt to see how custom software development can route repayments to the cheapest channel that works.
Sources
- Department of Financial Services and NPCI: FAQs on MDR on Select UPI (P2M) Transactions (15 September 2026)
- RBI: Reserve Bank of India (Regulation of Payment Aggregators) Directions, 2025 (Press Release, 15 September 2025)
- Fox Mandal: Government Notifies Charge-Free Payment Modes Under PSS Act (S.O. 5067(E), 14 September 2026)
- Vinod Kothari Consultants: Zero to MDR: Will Lenders Face a New Cost on Loan Repayments?
- Digiqt: Custom Software Development



