Technology

Floor Plan Financing Software to Prevent Stock Surprises

|Posted by Hitul Mistry / 17 Nov 26

Last reviewed: November 2026

Floor plan financing software is the system a lender uses to fund a dealer's inventory unit by unit, track each funded unit until it is sold and collect repayment for that specific unit. Without it, lenders learn that dealers have sold funded vehicles and kept the money only when an audit or a default reveals the gap.

This guide is for chief executive officers (CEOs) and heads of dealer finance at non-banking financial companies (NBFCs) and banks that fund vehicle, tractor, equipment or durable dealers. It covers why stock surprises happen, a seven-step workflow, eight stock audit checks and the metrics that show monitoring is working.

Key Takeaways

  • Floor plan risk sits in units sold but not repaid, known as sold out of trust (SOT), not in units sitting unsold.
  • Daily matching of funded units against independent sales signals finds SOT in days instead of weeks.
  • Ageing stock needs curtailment, because unsold units lose value while the exposure stays the same.
  • The Reserve Bank of India's (RBI's) August 2026 draft on NBFC revolving credit could affect replenishing dealer lines, so NBFCs should map their facilities now.

What Is Floor Plan Financing Software?

Floor plan financing software is the platform that runs dealer inventory funding from limit setting through unit funding, ageing, audits and repayment. Each funded unit, identified by chassis or serial number, is its own small loan with its own repayment trigger: the sale.

Pool-level limits based on reported stock and receivables are covered in our guide to borrowing base certificate automation. This guide focuses on unit-level funding, where the lender must know the status of every chassis it has paid for.

How Does Floor Plan Financing Differ From Pool-Level Working Capital?

Floor plan financing differs from pool-level working capital in four ways: what is funded, how repayment is triggered, what is monitored and where the fraud risk sits.

FactorPool-Level Working CapitalFloor Plan Financing
What is fundedTotal eligible stock and receivablesEach unit against its manufacturer invoice
Repayment triggerLimit review and drawing powerSale of the specific unit
What is monitoredPeriodic stock statementsUnit status, ageing and sale date
Main fraud riskInflated stock statementsUnits sold and money not remitted

Why Do Lenders Get Stock Surprises in Dealer Finance?

Lenders get stock surprises for five reasons: sales reported late, audits too rare or announced, ageing stock not curtailed, invoices not verified, and demo or transferred units untracked. Each has a direct prevention check.

CauseEffectPrevention Check
Dealer reports sales monthlySOT hidden for weeksDaily matching against independent sales data
Audits announced in advanceUnits borrowed from other dealers for the visitUnannounced, risk-based audits
No curtailment on old stockExposure exceeds unit valuePart-payment after set days
Invoice not verifiedFunding against fake or duplicate invoicesInvoice and chassis checks before payment
Demo and branch-transfer units untrackedUnits "missing" at auditSeparate status for demo and transfer

What Is Sold Out of Trust and How Do You Detect It?

Sold out of trust is a funded unit sold by the dealer without repayment to the lender within the agreed time. You detect it by matching funded units against signals the dealer does not control: manufacturer retail data, insurance policies or registrations issued on the same chassis, and physical audits.

A new insurance policy or registration on a funded chassis is often the earliest signal, because buyers need both before taking delivery. Our guide to dealer fraud in vehicle loans covers related dealer schemes on the retail side.

What Is the Right Floor Plan Financing Software Workflow?

The right floor plan financing software workflow has seven steps: set the dealer limit, verify and fund each unit, record the unit, monitor ageing, match sales daily, audit stock and settle on sale. Each step updates the same unit record.

  1. Set the dealer limit from sales run-rate, financials and any manufacturer support.
  2. Verify and fund each unit against the manufacturer's invoice.
  3. Record the unit with chassis or serial number, location and dates.
  4. Monitor ageing and trigger curtailment on slow units.
  5. Match sales daily against independent data.
  6. Audit stock physically, unannounced and risk-based.
  7. Settle on sale, matching each repayment to its unit.

Step 1: How Should a Dealer Floor Plan Limit Be Set?

A dealer floor plan limit should be set from the dealer's sales run-rate and stock turnover, not from its total stock. A limit equal to about 45 to 60 days of sales, for example, leaves little room for unsold stock to pile up on borrowed money.

Manufacturer tripartite or buyback agreements reduce risk, but only if the system tracks their conditions. Our guide to working capital limit renewal covers the annual review that should recalibrate the limit.

Steps 2 and 3: How Should Each Unit Be Verified Before Funding?

Each unit should be verified by matching the manufacturer invoice, chassis or serial number and amount before payment is released, preferably straight to the manufacturer. Duplicate chassis numbers across dealers or lenders are a red flag.

According to Central Board of Indirect Taxes and Customs (CBIC) Notification No. 10/2023–Central Tax (10 May 2023), e-invoicing applies from 1 August 2023 to businesses with aggregate turnover above ₹5 crore. Most manufacturers' invoices to dealers therefore carry an Invoice Reference Number (IRN) that can be checked, which makes invoice verification a data task.

Step 4: Why Must Ageing Stock Trigger Curtailment?

Ageing stock must trigger curtailment because a unit's resale value falls while the lender's exposure on it does not. A typical structure, used here as an example only, asks for 10% of the funded amount at 90 days and full repayment at 120 days.

Manufacturer interest-free periods complicate this. The system should start the lender's ageing clock from the funding date, not from the end of the manufacturer's free period.

Steps 5 and 6: How Should Sales Matching and Stock Audits Work Together?

Sales matching and stock audits work together by covering different risks: matching finds units sold without repayment, while audits confirm unsold units are physically present. Neither is enough alone.

Pick audit samples by risk, weighting old units, high-value units and dealers with late remittances. Our guide to stock statement and drawing power monitoring explains how physical checks feed limit decisions.

Digiqt's credit line utilisation monitoring AI agent shows how utilisation patterns can be watched for early stress.

Step 7: How Should Dealer Repayments Be Matched to Units?

Dealer repayments should be matched to specific units, using chassis or invoice references in the payment or a dealer upload. A lump-sum payment without references hides which units are still unpaid, and our guide to unidentified receipts in lending explains how to stop that.

Which Stock Audit Checks Should Floor Plan Financing Software Record?

Floor plan financing software should record eight stock audit checks: unit present, chassis match, condition, location, demo status, transfer status, documents held and sale evidence. Each result goes against the unit, not into a separate report.

Stock Audit CheckWhat It Catches
Unit physically presentSold or missing units
Chassis or serial number scanned and matchedUnits swapped or borrowed from other dealers
Condition and damage notedValue below funded amount
Location matches the recordUnits moved to unapproved yards
Demo use declaredFunded stock used as demo without approval
Branch transfer recordedUnits "missing" because they moved
Original documents held where requiredUnits sold with documents released
Sale evidence for absent unitsSOT not yet reported

How many of your funded units were sold last week without a matching repayment?

Talk to Our Lending Platform Specialists

Visit Digiqt to see how a custom lending platform can match every funded unit to its sale and repayment.

How Much Does Late SOT Detection Cost a Lender?

Late SOT detection raises the amount of unremitted money outstanding at any time in direct proportion to the detection delay. In this illustrative scenario, a lender's dealers sell ₹500 crore of funded units a month.

Assume 3% of those sales are not remitted on time, or ₹15 crore a month. Monthly audits find these after about 30 days on average, while daily sales matching finds them in about three.

MeasureMonthly Audit OnlyDaily Sales Matching
Funded units sold a month₹500 crore₹500 crore
Sales not remitted on time₹15 crore₹15 crore
Average days before detection303
Unremitted exposure outstanding at any timeAbout ₹15 croreAbout ₹1.5 crore

The lesson for leadership: SOT losses grow with detection delay, not just with the number of dishonest dealers. Shorten the delay and a dealer failure becomes a contained loss rather than a portfolio event.

Where Does the Digiqt Lending Platform Fit in Floor Plan Financing Software?

The Digiqt Lending Platform is built for lenders that want to initiate a custom lending product or platform "in a matter of weeks". Digiqt says it handles everything from onboarding and disbursement to repayments through application programming interfaces (APIs), with an NBFC use case covering onboarding, payments and other financial products.

The product page does not name dealer finance modules, so the features below would be custom builds on the platform:

  • Onboarding APIs for dealer setup, limits and manufacturer agreements.
  • Disbursement per unit, with invoice and chassis checks before payment.
  • Repayments matched to units, with curtailment demands generated by ageing.
  • Custom builds for daily sales matching, the audit app and the dealer risk score.

Digiqt's delivery runs from problem understanding, through a suggested solution where research, return on investment (ROI) and fit are validated, to delivery with prototyping, agile sprints, launch and maintenance. Test SOT matching on a past audit cycle, using your own dealer data, before go-live.

Which Monitoring Approach Fits Each Dealer Type?

The right monitoring approach depends on manufacturer support, stock type and the dealer's track record.

SituationRecommended Approach
Manufacturer-backed dealer with buyback agreementDaily matching with manufacturer data, lighter audit sample
Multi-brand dealer without manufacturer supportTighter limits, frequent unannounced audits
Used vehicle dealerValuation per unit, shorter curtailment period
Tractor or equipment dealer with seasonal stockLimits and curtailment aligned to the selling season
New dealer with no repayment historyLow starting limit, raised on clean audits

Which Metrics Show Floor Plan Financing Software Is Working?

Five metrics show floor plan financing software is working: SOT incidence, days to remit after sale, stock ageing, audit variance and curtailment compliance. Review them weekly by dealer.

MetricFormulaWhat a Weak Number Signals
SOT incidenceUnits sold and not remitted on time ÷ units soldDealer using lender money as working capital
Days to remit after saleAverage days from sale signal to repaymentRemittance discipline slipping
Stock ageingFunded value over 90 days ÷ total funded valueSlow stock building up
Audit varianceUnits not found or mismatched ÷ units auditedAudits finding what data missed
Curtailment complianceCurtailments paid on time ÷ curtailments dueEarly sign of dealer cash stress

Watch funding against actual end use too, as our guide to end-use monitoring of loans explains.

Which Mistakes Cause Stock Surprises?

Four mistakes cause most stock surprises, and each is a monitoring gap.

  • Relying on dealer-reported sales. The dealer controls the timing of bad news.
  • Announcing audits. Units can be borrowed for the day.
  • Accepting lump-sum repayments. Unpaid units hide inside them.
  • Skipping curtailment for good dealers. Ageing stock loses value regardless of reputation.

What Is Changing Next?

NBFC dealer lines may need restructuring if a current RBI draft is finalised. According to the RBI draft (Non-Banking Financial Companies – Credit Facilities) Amendment Directions, 2026, released for comments on 6 August 2026, NBFCs other than authorised credit card issuers would offer only term loans, whose limit "cannot be restored / replenished upon repayment".

The draft does not mention dealer finance, and as of November 2026 no final directions had been issued. A floor plan line that replenishes as units are repaid could fall outside the term-loan definition, so NBFCs should take a legal view and make sure their system can run each unit as a separate fixed-principal loan if needed.

Want every funded unit, sale and repayment on one dealer record?

Talk to Our Lending Platform Specialists

Visit Digiqt to see how the Digiqt Lending Platform can be built around dealer inventory funding.

Sources

Read our latest blogs and research

Featured Resources

Technology

Borrowing Base Certificate Automation for ABL Lenders

Borrowing base certificate automation for ABL lenders: eligibility rules, advance rates, reserves, dilution and daily collateral monitoring, with an example.

Read more
Technology

Stock Statement and Drawing Power Monitoring: Close DP Gaps

Stock statement and drawing power monitoring for MSME lenders: how DP is calculated, why it drifts, a 7-step workflow and metrics that keep limits backed.

Read more
Technology

Dealer Fraud in Vehicle Loans: Catch Inflated Invoices

Dealer fraud in vehicle loans: how inflated invoices and ghost vehicles get financed, and the invoice, GST and Vahan checks that stop them before disbursal.

Read more

About Us

We are a technology services company focused on enabling businesses to scale through AI-driven transformation. At the intersection of innovation, automation, and design, we help our clients rethink how technology can create real business value.

From AI-powered product development to intelligent automation and custom GenAI solutions, we bring deep technical expertise and a problem-solving mindset to every project. Whether you're a startup or an enterprise, we act as your technology partner, building scalable, future-ready solutions tailored to your industry.

Driven by curiosity and built on trust, we believe in turning complexity into clarity and ideas into impact.

Our key clients

Companies we are associated with

Life99
Edelweiss
Aura
Kotak Securities
Coverfox
Phyllo
Quantify Capital
ArtistOnGo
Unimon Energy

Our Offices

Ahmedabad

B-714, K P Epitome, near Dav International School, Makarba, Ahmedabad, Gujarat 380051

+91 99747 29554

Mumbai

C-20, G Block, WeWork, Enam Sambhav, Bandra-Kurla Complex, Mumbai, Maharashtra 400051

+91 99747 29554

Stockholm

Bäverbäcksgränd 10 12462 Bandhagen, Stockholm, Sweden.

+46 72789 9039

Malaysia

Level 23-1, Premier Suite One Mont Kiara, No 1, Jalan Kiara, Mont Kiara, 50480 Kuala Lumpur

Lewes

16192 Coastal Highway, Lewes, Delaware 19958, USA

software developers ahmedabad
ISO 9001:2015 Certified

Call us

Career: +91 90165 81674

Sales: +91 99747 29554

Email us

Career: hr@digiqt.com

Sales: hitul@digiqt.com

© Digiqt 2026, All Rights Reserved