DPD Calculation for NBFCs: RBI Day-End Rules and Examples
Last reviewed: November 2026
DPD calculation for NBFCs is the daily count of how many days the oldest unpaid amount on each loan has been overdue, run in the lender's day-end process. A one-day error in that count can tag an account as non-performing a day late, misstate the books and send wrong data to credit bureaus.
This guide is for heads of loan operations and chief risk officers at non-banking financial companies (NBFCs) and housing finance companies (HFCs). It covers the Reserve Bank of India (RBI) day-end rules, the days past due (DPD) formula, a worked part-payment example and an edge-case table, and shows how the Digiqt Lending Platform team builds a DPD engine.
Quick Answer
- DPD = day-end date − oldest unpaid due date + 1, counted every day-end after all receipts are appropriated; counting the due date as day 1 matches the RBI's own illustration of special mention account (SMA) and non-performing asset (NPA) dates.
- Part payments do not reset DPD; only full clearance of the oldest dues moves the count forward.
What Is DPD Calculation for NBFCs?
DPD calculation for NBFCs turns repayment history into one number per account per day: the age, in days, of the oldest amount still overdue. This guide covers that count; the rule that turns the count into SMA and NPA flags is covered in system-based asset classification.
DPD vs SMA is a frequent mix-up. DPD is the number, while SMA-0, SMA-1 and SMA-2 are labels assigned from it.
What Do RBI Rules Say About Counting Days Past Due?
RBI rules on counting days past due sit in the RBI (Non-Banking Financial Companies – Income Recognition, Asset Classification and Provisioning) Directions, 2025 (the IRACP Directions, RBI/DOR/2025-26/356, 28 November 2025). They consolidate the RBI's 12 November 2021 clarification on day-end processing.
| Para | Rule |
|---|---|
| 11(2) | Definition of overdue: any amount due under a credit facility is "overdue" if not paid on the due date fixed by the NBFC |
| 15(1) | Loan agreements sanctioned on or after 31 December 2021 must state exact due dates and examples of SMA and NPA dates |
| 18 | Accounts are flagged overdue in the day-end process for the due date, irrespective of when the process runs |
| 19 | SMA and NPA classification is done in day-end; the classification date is the calendar date of that day-end |
| 24–25 | NPA accounts upgrade only when entire arrears of interest and principal, on all facilities, are paid |
The buckets come from paragraph 18 of the RBI NBFC Resolution of Stressed Assets Directions, 2025, in Part A, which covers deposit-taking NBFCs and non-deposit NBFCs with assets of ₹500 crore or more.
| Days Past Due | Status |
|---|---|
| 1–30 | SMA-0 |
| 31–60 | SMA-1 |
| 61–90 | SMA-2 |
| More than 90 | NPA; base layer NBFCs (NBFC-BL) reached this 90-day norm on 31 March 2026 after the glide path in paragraph 44 |
What Does a One-Day Error in DPD Calculation Cost?
A one-day error in DPD calculation can understate NPAs on the exact date that matters most: the reporting date. In this illustrative case, 420 accounts reach their 91st overdue day on 31 March.
| Measure | Correct Count | Count Starting the Day After Due Date |
|---|---|---|
| DPD shown on 31 March | 91 | 90 |
| Status | NPA | SMA-2 |
| Accounts affected | 420 | 420 shown standard |
| Average outstanding | ₹2.4 lakh | ₹2.4 lakh |
| Gross NPA understated | – | ₹10.08 crore |
The same error flows into credit bureau files, where it triggers the disputes described in credit information company (CIC) data rejection fixes.
How Do You Calculate DPD for an NBFC Loan?
You calculate DPD for an NBFC loan in four steps: appropriate all receipts, find the oldest due date with any unpaid amount, count days to the day-end date and store the result with that calendar date.
DPD = day-end date − oldest unpaid due date + 1 (zero if nothing is overdue)
The "+1" reproduces the RBI's illustration in paragraph 19. A loan due on 31 March 2021 and unpaid becomes SMA-1 on 30 April, SMA-2 on 30 May and NPA on 29 June, which are days 31, 61 and 91 when the due date counts as day 1.
How Does DPD Calculation Work With Partial Payments?
DPD calculation with partial payments follows the oldest unpaid instalment, so the count moves only when that instalment is fully cleared. In this illustrative 2026 loan, the equated monthly instalment (EMI) is ₹10,000, due on the 5th, and payments go to the oldest dues first.
| Date | Event | Oldest Unpaid Due | DPD | Status |
|---|---|---|---|---|
| 5 Jan | EMI 1 due, unpaid | 5 Jan | 1 | SMA-0 |
| 5 Feb | EMI 2 due, unpaid | 5 Jan | 32 | SMA-1 |
| 20 Feb | ₹12,000 paid: EMI 1 cleared, ₹2,000 to EMI 2 | 5 Feb | 16 | SMA-0 |
| 5 Mar | EMI 3 due, unpaid; ₹8,000 of EMI 2 still due | 5 Feb | 29 | SMA-0 |
| 10 Mar | ₹8,000 paid: EMI 2 cleared | 5 Mar | 6 | SMA-0 |
| 5 Apr | EMI 4 due; EMI 3 unpaid | 5 Mar | 32 | SMA-1 |
On 20 February, ₹8,000 is still unpaid, yet DPD falls from 47 to 16 because the January instalment is fully cleared. If charges were appropriated before instalments, the same ₹12,000 could leave January partly unpaid, which is why the repayment appropriation order must be fixed before DPD logic.
Which Edge Cases Break DPD Calculation for NBFCs?
Nine edge cases break DPD calculation for NBFCs unless written rules cover them. Copy this table into your DPD policy note; the actions are illustrative recommendations.
| Situation | Recommended Treatment |
|---|---|
| Due dates on holidays | Count from the due date in the agreement unless the agreement moves it |
| Payment received after day-end ran | Counts from the next day-end |
| Part payment | DPD continues from the oldest unpaid instalment |
| Overdue charges | Include if a due date is fixed; "any other amount" counts for SMA |
| Cheque or eNACH (electronic National Automated Clearing House) bounce after credit | Reverse and recompute DPD from the original due date; see payment reversal handling |
| Receipt parked in suspense | DPD continues until appropriated; clear unidentified receipts daily |
| Moratorium | No DPD until repayment starts on the date in the agreement; see moratorium implementation |
| Several loans to one borrower | DPD per facility; NPA status applies borrower-wise |
| Back-dated receipt entry | Maker-checker approval with reason, recompute logged |
How Often Must NBFCs Report DPD to Credit Bureaus?
NBFCs must report DPD to CICs four times a month, as on the 9th, 16th, 23rd and last day. Under paragraph 10(2) of the RBI NBFC Credit Information Reporting Directions, 2025, the month-end full file is due by the 5th, incremental files are due within four calendar days, and accounts whose only change is DPD must still be included.
Paragraph 34(1) also requires a short message service (SMS) or email alert to the borrower when default or DPD is reported. A wrong count therefore reaches the borrower and every bureau within days.
Is your DPD count one day off from the RBI's own example?
See How Digiqt Builds a Day-End DPD Engine
Get oldest-due logic and reversal recompute in your loan system, or talk to us about your day-end process.
How Does the Digiqt Lending Platform Handle DPD Calculation?
The Digiqt Lending Platform handles DPD calculation through logic Digiqt builds into your custom lending platform, alongside onboarding, disbursement and repayments handled through its application programming interfaces (APIs). See how Digiqt builds custom lending platforms, from problem understanding to agile sprints and launch.
| Step | Typical Legacy Count | With a DPD Engine Built by Digiqt |
|---|---|---|
| Count base | Days since due date, sometimes off by one | Oldest unpaid due date, due date as day 1 |
| Part payments | Arrears ÷ EMI estimates | Instalment-level appropriation |
| Bounces | Corrected next month | Recomputed in the next day-end |
| Classification date | Date the batch ran | Calendar date of the day-end |
| Outputs | Spreadsheet extracts | APIs for collections, bureau files and reports |
Digiqt validates the logic against your own loan history before go-live, then launches, monitors and maintains it. DPD buckets then feed your bucket-wise collection strategy and Central Repository of Information on Large Credits (CRILC) reporting for NBFCs.
How Do You Test DPD Calculation Before Go-Live?
You test DPD calculation before go-live by running ten scenarios and reconciling the results with an independent spreadsheet. Copy this list into your test plan.
- Due 31 March, unpaid: SMA-1 on 30 April, SMA-2 on 30 May, NPA on 29 June.
- Part payment that does not clear the oldest instalment keeps DPD running.
- Part payment that clears the oldest instalment moves DPD to the next due date.
- Full arrears paid returns DPD to zero.
- NPA borrower with two loans stays NPA until both are cleared.
- Bounce on day 3 after credit restores the original DPD.
- Payment received after day-end counts the next day.
- Leap-year February counts 29 days.
- Moratorium account shows zero DPD until repayment starts.
- DPD reported to credit bureaus matches the loan management system (LMS) on month-end.
Run a DPD reconciliation between the LMS, collections and bureau files every month-end, and keep the day-end logs for audit.
Want DPD, SMA and NPA dates your auditors can recompute from day-end logs?
Plan a DPD Engine With the Digiqt Lending Team
Share your current DPD logic and sample accounts, or visit Digiqt to request a review call.
Sources
- RBI: Non-Banking Financial Companies – Income Recognition, Asset Classification and Provisioning Directions, 2025
- RBI: Non-Banking Financial Companies – Resolution of Stressed Assets Directions, 2025 (SMA categories)
- RBI: Housing Finance Companies Directions, 2025
- RBI: Non-Banking Financial Companies – Credit Information Reporting Directions, 2025



